Custom Wrist Wraps & Lifting Straps Manufacturer

Torn thumb loops. Velcro that quits after two months. Edges that dig into the wrist. We re-engineered every failure point gym buyers complain about — so your wraps and straps ship with fewer returns and better ratings. Full private-label programs for fitness brands, gym retailers, and Amazon sellers.
ISO 9001 & BSCI Certified
MOQ 500 Units
Free Design Mockup in 48h

Wrist Wraps vs Lifting Straps — Two Products, One Factory

Many buyers — and many end users — mix these two up. They look similar on a shelf, but they solve opposite problems. We manufacture both, so you can build a complete lifting-accessories line from one supplier.

Wrist Wraps Lifting Straps
What it does Stabilizes the wrist joint and prevents hyperextension under load. Ties the hand to the bar to eliminate grip fatigue.
Wraps around Your wrist. The barbell or dumbbell.
Best for Pressing: bench press, overhead press, squats. Pulling: deadlifts, rows, shrugs, strongman events.
Material Elastic woven blend, typically cotton/polyester/nylon with elastic or rubber fibers. Low-stretch webbing or strap material, commonly cotton webbing, nylon webbing, or leather.
Closure Hook-and-loop with thumb loop. Lasso or Figure-8 loop, no closure hardware.
Manufacturing note: Most fitness brands stock both. Wrist wraps protect and stabilize the wrist during pressing movements, while lifting straps help the hand stay connected to the bar during heavy pulling.

Custom Weightlifting Wrist Wraps — Stiffness & Length Built to Your Spec

A wrap line comes down to two variables: how stiff, and how long. We produce the full grid, so you can build out your range from entry-level to competition-grade. The specs below are starting points — every dimension, blend, and density is fully customizable.
Flexible Wraps

Flexible Wraps

Softer elastic with more give. Comfortable for CrossFit, functional training, and high-rep work where the wrist still needs to move freely. A strong fit for general gym retail.

Medium-Stiff Wraps

Medium-Stiff Wraps

The all-rounder. Firm support for heavy bench and overhead pressing while staying wearable through a full session. The highest-volume tier for most fitness brands.

Stiff Cast-Like Wraps

Stiff “Cast-Like” Wraps

Dense, high-tension elastic that locks the wrist near-immobile. Built for powerlifters and max-effort pressing. Pair with longer lengths for the heavy-duty end of your line.

Standard Lengths
12" / 18" / 24" / 36". Shorter wraps suit lighter training and smaller wrists; longer wraps allow more turns and more support. Custom lengths are available. Sample, development, and revision fees may apply, and can be refunded against bulk orders.
  • Reinforced thumb loop with high-rebound elastic
  • Wide hook-and-loop closure panel for repeated daily use
  • L/R labeling available — a top-rated convenience feature in end-user reviews
  • Single-ply elastic covered in cotton, polyester, or blends

Custom Lifting Straps — Lasso, Figure-8 & Padded

Lifting straps (also sold as wrist straps or gym straps) are non-elastic webbing that loops around the bar so grip strength stops limiting the lift. We weave, cut, and sew all three mainstream formats in-house.
Lasso Lifting Straps

Lasso Lifting Straps

The classic adjustable loop-and-tail design. Works on barbells, dumbbells, and machines; the default format for gym retail and Amazon listings.

Figure-8 Lifting Straps

Figure-8 Lifting Straps

A closed double-loop that locks the hand to the bar with no re-gripping. The go-to for heavy deadlifts and strongman training; favored where maximum security beats quick release.

Padded Wrist Straps

Padded Wrist Straps

Lasso format with a neoprene cushion at the wrist for comfort during long pulling sessions. A strong mid-price SKU for general fitness lines.

Strap Specs
Lifting straps, also sold as wrist straps or gym straps, are non-elastic webbing products that loop around the bar so grip strength stops limiting the lift. We cut, sew, assemble, and finish all three mainstream formats in-house.
  • Webbing options: cotton, nylon, and leather
  • Standard length range 12"–24", width 1"–1.5"; custom on request
  • End-to-end multi-row stitching at all load-bearing joints

The 3 Complaints That Kill Lifting-Gear Ratings — and How We Engineered Them Out

01

Torn thumb loops

Failure Point

Cheap wraps attach the thumb loop with a single line of standard stitching and use loop elastic with poor rebound memory. Ours are anchored with bartack reinforcement stitching and cut from high-rebound elastic that holds its shape through months of stretch-and-release. The loop fails first on most wraps, so we build it to last longest.

02

Hook-and-loop that quits

Closure Breakdown

When the closure stops biting, the wrap is dead — and the review says so. We fit a wider hook-and-loop panel than the category standard and secure it with multi-row reinforced stitching, so closure strength outlasts the elastic itself.

03

Scratchy edges & skin irritation

Comfort Failure

Raw-cut elastic edges dig into the wrist under tension. Every wrap is finished with soft binding tape and rounded edge construction, and material options are available for sensitive-skin markets.

Spec revision support: Share the recurring complaints from your current supplier, and we’ll address each one in a revised spec sheet for your next production run.

Competition-Dimension Wraps for Powerlifting Lines

Max Length

1 m

Securing tabs and hook-and-loop are included inside this length.

Max Width

8 cm

Built for competition-dimension wrist wrap lines.

Thumb Loop

Off

The loop is worn off the thumb during the lift.

Competition Dimension Control

The International Powerlifting Federation sets strict equipment dimensions for competition: wrist wraps must not exceed 1 m in length and 8 cm in width, with any securing tabs and hook-and-loop included inside that length, and a thumb loop that is worn off the thumb during the lift.

  • Built to IPF competition dimensions for powerlifting-focused wrap lines.
  • Suitable for brands developing competition-line SKUs from the first spec sheet.
  • Spec documentation can be supplied for brands preparing federation registration.
Compliance note: We manufacture wraps to competition dimensions and provide technical documentation support. Federation approval and approved-list registration depend on the brand’s own submission and review process.
01

Logo & Branding

Silicone ink printing, woven labels, 3D rubber patches, embossed/debossed heat press. L/R markers can carry brand color accents.

02

Colors & Patterns

Solid dyes, camo and custom prints, contrast stitching, team colorways. Full sublimation available on strap webbing.

03

Spec Engineering

Stiffness blend, length, width, loop design, padding density — every variable adjustable from our standard grid.

04

Packaging

Polybag, hang-tag retail card, gift box, Amazon-ready FNSKU labeling, multilingual inserts.

Certified, factory-direct partner with clear quotes, honest MOQs, and on-spec production—fast sampling, tight QC, predictable lead times.

Rapid Response & Free Design

24-hour quote response, with free design mockups and specs to speed sampling and approvals.

Certified Quality Systems

ISO 9001 and BSCI certified; third-party testing per batch supports consistent compliance in your target markets.

3-Year Warranty & Support

Defect warranty plus responsive after-sales within 48 hours protects your brand reputation.

Transparent 6-Step Partnership Process

Inguiry
Design
Sample
Production
QC
Delivery

Submit your requirements via form. 24-hour response guaranteed. 

1 Day 

Free design proposal, material recommendations, and quotation. 
1 Day

Physical samples are produced and shipped for approval. 
5-7 Days

Bulk manufacturing begins upon sample confirmation. 
15-25 Days

100% inspection with third-party testing reports. 
1 Day 

Book cargo and arrange shipping to port.

1-3 Days

Inguiry

Submit your requirements via
form. 24-hour response guaranteed.
1 Day 

Design

Free design proposal, material recommendations, and quotation. 
1 Day

Sample

Physical samples are
produced and shipped for approval. 
5-7 Days

Production

Bulk manufacturing
begins upon sample confirmation. 
15-25 Days

QC

100% inspection with third-party testing reports. 
1 Day 

Delivery

Book cargo and arrange shipping to the port.
1-3 Days

Private-Label Wrist Wraps & Lifting Straps — Frequently Asked Questions

Get clear answers to common questions about our private-label wrist wraps and lifting straps — from MOQ and lead times to sampling, fit matching and quality control for long-term partnerships.

What is your MOQ for custom wrist wraps and lifting straps?
MOQ is 500 pieces per style. You can mix wraps and straps in one order to build a full lifting-accessories line.
Yes. Send us a physical reference sample and we will reverse-engineer the elastic blend and tension, then confirm with a counter-sample before production.
Our standard wrap grid runs 12″ to 36″ in length; straps run 12″ to 24″ with 1″–1.5″ webbing. Any custom dimension is available — including competition-dimension wraps within the IPF’s 1 m × 8 cm limit.
Free design mockups within 48 hours; physical samples in 3–7 days after sample payment, refunded against your bulk order.
Yes — woven labels, printed logos, rubber patches, retail boxes, and Amazon-ready packaging are all produced in-house.

Ready to Start Your Custom Wrist Wraps & Lifting Straps Project?

Get a free design mockup and detailed quotation within 24 hours. We help fitness brands, gym retailers, and Amazon sellers build private-label lifting accessories with custom stiffness, lengths, stitching, branding, and packaging.

Why Choose Us?

Request Your Free Quote

No spam. We reply within 24 hours. Quotes include timeline and shipping estimate.

Contact Us Today — Get a Reply Within 12 Hours

Factory-direct · NDA friendly · Sample support · OEKO-TEX/BSCI (on request)

Your information will be kept strictly confidential.